|
|
|
|
|
|
RhinoMoto - Suzuki Early GSXR Fork Sliders
|
Our Price: $59.99
|
|
|
Early GSXR Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0006 fits all '04 GSXR, all years Hayabusa and '05 GSXR600/750. It includes 2 fork sliders with locking tapers and stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Suzuki '05 GSXR1000 Fork Sliders
|
|
Our Price: $59.99
|
|
|
'05 GXSR1000 Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from virgin plastic rod for superior stregnth, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit requires that the axle retention bolt on the right side be removed and a nut (included in kit) be pressed into the bolt. Once this has been done, the sliders install in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0026 includes 1 fork slider with locking taper, 1 slider with preff-fit nut for bolt side of axle, stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Suzuki '06+ GSXR (All) Fork Sliders
|
|
Our Price: $59.99
|
|
|
'06+ GSXR (All) Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit requires that the axle retention bolt on the right side be removed and a nut (included in kit) be pressed into the bolt. Once this has been done, the sliders install in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0052 fits all GSXR '06 and later and includes 1 fork slider with locking taper, 1 slider with press-fit nut for bolt side of axle, stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Suzuki '05+ GSXR600/750 Frame Sliders
|
|
Our Price: $74.99
|
|
|
'05+ GSXR600/750 Frame Sliders
List Price: $74.99
These sturdy frame slider kits are billet 6061 aluminum supports and buttons machined from solid polymer rod. All parts are CNC machined for a precision fit and the highest quality surface finish possible. The supports bolt through the frame and front motor mounts with included hardened bolts. Cutting of the fairings is required for installation. The buttons thread onto the supports and can be removed quickly without tools. Kit includes complete installation instructions. Available in black powder coated finish only, not silver as shown.
Kit 150-0083 includes 2 black frame slider supports, 2 slider buttons, longer grade 12.9 bolts, installation instructions and 2 RhinoMoto logo stickers.
This kit requires cutting of the left fairing.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Suzuki GSXR1000 '07 Frame Sliders
|
|
Our Price: $74.99
|
|
|
GSXR1000 '07 Frame Sliders
Your Price: $74.99
These sturdy frame slider kits are billet 6061 aluminum supports and buttons machined from solid polymer rod. All parts are CNC machined for a precision fit and the highest quality surface finish possible. The supports bolt through the frame and front motor mounts with included hardened bolts. Some cutting of left fairing required for installation. The buttons thread onto the supports and can be removed quickly without tools. Kit includes complete installation instructions. Available in black powder coated finish only, not silver as shown.
Kit 150-0093 includes 2 black frame slider supports, 2 slider buttons, longer grade 12.9 bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Suzuki '05/'06 GSXR1000 Frame Sliders
|
|
Our Price: $84.99
|
|
|
'05/'06 GSXR1000 Frame Sliders
List Price: $84.99
These sturdy frame slider kits are billet 6061 aluminum supports and buttons machined from solid polymer rod. All parts are CNC machined for a precision fit and the highest quality surface finish possible. The supports bolt through the frame and front motor mounts with included hardened bolts. Some cutting of left fairing required for installation. The buttons thread onto the supports and can be removed quickly without tools. Kit includes complete installation instructions. Available in black powder coated finish only, not silver as shown.
Kit 150-0047 includes 2 black frame slider supports, 2 slider buttons, longer grade 12.9 bolts, installation instructions and 2 RhinoMoto logo stickers.
The fairing must be notched slightly for installation of this kit. Kit 150-0048 is available which does not require this notching.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Suzuki '05/'06 GSXR1000 Frame Sliders (no cut)
|
|
Our Price: $84.99
|
|
|
05/'06 GSXR1000 Frame Sliders (no cut)
Your Price: $84.99
These sturdy frame slider kits are billet 6061 aluminum supports and buttons machined from solid polymer rod. All parts are CNC machined for a precision fit and the highest quality surface finish possible. The supports bolt through the frame and front motor mounts with included grade 8.8 hardware. No cutting of fairing is required for installation. The buttons thread onto the supports and can be removed quickly without tools. Kit includes complete installation instructions. Available in black powder coated finish only, not silver as shown.
Kit 150-0048 includes 2 black frame slider supports, 2 slider buttons, longer grade 12.9 bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
