|
|
|
|
|
|
Powerlet - PKT-040 Sportbike Cigarette Socket Tail Kit
|
List Price: $27.95
Our Price: $25.15
You save $2.80!
|
|
|
When you need a low cost, quick installation of an automotive compatible 12V outlet, look no further. Some riders prefer the common cigarette type socket found in their automobile. We feel these cigarette socket kits are best installed inside of a compartment like a tail section, tankbag or other luggage. Powerlet has designed these kits using the tightest fitting cigarette sockets available. A tight fitting cigarette socket can see reduced vibration inside of a tankbag or other luggage.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Triumph Speed Triple Fork Sliders (early)
|
|
Our Price: $59.99
|
|
|
Speed Triple Fork Sliders (early)
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
These fork sliders fit Speed Triples with serial numbers from 141872 TO 210444, which have standard (non-inverted) forks. The hex recess on the left side is 19mm.
Kit 150-0020 includes 2 fork sliders with locking tapers and stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Triumph Speed Triple Fork Sliders (late)
|
|
Our Price: $59.99
|
|
|
Speed Triple Fork Sliders (late)
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
These fork sliders fit Speed Triple starting with serial number 210445 and higher. They have inverted forks and the hex recess on the left side is 22mm.
Kit 150-0079 includes 2 fork sliders with locking tapers and stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Triumph Daytona 675/Street Triple Fork Sliders
|
|
Our Price: $59.99
|
|
|
Daytona 675/Street Triple Fork Sliders
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms, which is particularly tricky given the shapes on the fork bottoms of the 675. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. The kit installs in just a few minutes with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times. The sliders in this kit are held in place by a rod passing through the axle due to the small inner diameter of the 675 axle.
Kit 150-0038 includes 2 fork sliders, connecting rod, stainless steel fasteners, installation instructions and 2 RhinoMoto logo stickers
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Triumph Street Triple Fork Sliders
|
|
Our Price: $59.99
|
|
|
Street Triple Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms, which is particularly tricky given the shapes on the fork bottoms of the Street Triple. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. The kit installs in just a few minutes with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times. The sliders in this kit are held in place by a rod passing through the axle due to the small inner diameter of the axle.
Kit 150-0038 includes 2 fork sliders, connecting rod, stainless steel fasteners, installation instructions and 2 RhinoMoto logo stickers
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Triumph Street Triple/Speed Four Barends
|
|
Our Price: $59.99
|
|
|
These barends fit the Street Triple (including R)and Speed Four and feature steel bodies for vibration dampening weight, replaceable polymer buttons for the sliding surface.The included spacers allow the barends to be installed without modifications to your stock bars. The bodies are available in stainless steel and black powder coated finishes. Kits are supplied with flat style buttons standard, but round buttons are available. Please specify barend finish and button style when ordering.
Kit 150-0124 includes 2 mirror mounts with choice of buttons, 2 spacers, stainless steel mounting hardware, 2 RhinoMoto logo stickers and installation instructions
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Speed Triple Barends
|
|
|
Speed Triple Barends
These barendsfeature steel bodies for vibration dampening weight, replaceable polymer buttons for the sliding surfaces. Adapters are included that fit bars with inner diameters ranging from .525" to .575" (13.5mm to 14.6mm). The bodies are available in stainless steel and black powder coated finishes. Kits are supplied with flat style buttons standard, but round buttons are available. Please specify barend finish and button style when ordering.
This kit fits all Speed Triple models.
Kit 150-0065 includes 2 barends with choice of finish and button style, 2 bar adapters, stainless fasteners, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Triumph 675/Tiger/Street Triple Swingarm Sliders
|
|
Our Price: $64.99
|
|
|
Swingarm sliders protect the swingarm, rear axle, and axle nut in a crash and slide. The most common type of swingarm slider is a combination spool/slider, but these are prone to failure. Either the relatively small bolts holding the spools on shear off or the tabs themselves tear off the swingarm when the spools hit the ground. RhinoMoto swingarm sliders fit inside the axle and are supported by the axle when impacted from straight on or from the side. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the swingarm, avoiding that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than five minutes with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0087 fits daytona 675, Street Triple, Street Triple R and '07 Tiger. It includes 2 sliders, connecting rod, stainless steel fasteners, 2 RhinoMoto logo stickers and installation instructions.
|
|
|
|
|
|
|
|
|
|
Woodcraft - Triumph Speed Triple '05-'10 Frame Sliders
|
|
Our Price: $67.49
|
|
|
Durability - Woodcraft's patented 2-piece sliders are the most durable sliders on the market. Our perpendicular mounting bolt allows the slider to be solid rather than hollow (like other sliders) which provides nearly 50% more material on the road and much greater durability.
Hassle Free Replacement - Our 2-piece design with its perpendicular mounting bolt means that after a crash you won't be digging out a ground down bolt from the center of a destroyed hollow slider. Our sliders make puck replacement fast and easy thanks to our patented design
Race proven - Woodcraft's experienced racer R&D squad made it clear that sliders must stick out far enough to protect the bike but not so long they get ripped off as the bike slides down the road! The end result is all Woodcraft sliders are the ideal length giving you the protection without too much projection
Fairing Modification - Most models require modification to ensure optimal strength
|
|
|
|
|
|
|
|
|
|
Techmount - Handlebar Mount (fits 7/8" thru 1 1/4" ) 3-30912
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
This is our 3rd generation mounting system. We were able to combine all of the current production handlebar sizes from 7/8” (22mm) up to 1 ¼” (32mm) into one mount system. This allows it to fit virtually every motorcycle with tubular handlebars. Requires only ¾” of handlebar space and can be mounted at any angle. Available in Chrome, Black or Silver. Having no need for a shaft, makes this mount system very strong and very compact. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate!
|
|
|
|
