|
|
|
|
|
|
RhinoMoto - Pre-drilled axle bolt for R1/R6 and CBR600RR
|
Our Price: $7.99
|
|
|
Pre-drilled axle bolt for R1/R6 and CBR600RR
Your Price: $7.99
The Yamaha R1/R6 and Honda CBR600RR front axles are retained with a solid M14 bolt. Our fork slider kits 150-0095-001 and 150-0122-001 require that bolt to be drilled and tapped with M6 threads to attach the slider on the bolt side. We provide a predrilled bolt for those that do not want deal with tapping their original bolt.
This is a factory bolt that we drill and tap, not an "adapter" of possibly lower specification than the OEM part. Why second-guess the factory on the part that holds your front wheel on when you can use the original as the factory designed?
Part number 102-0002-002
|
|
|
|
|
|
|
|
|
|
Powerlet - PKT-027 R/L Honda ST1300 Front Panel Kit Left or Right Side
|
List Price: $39.95
Our Price: $34.95
You save $5.00!
|
|
|
Heavy Duty 14AWG 105C Wiring Harness Water-proof Automotive ATO Fuseholder Includes 15 Amp Fuse Outdoor Rated Ty-wraps Detailed Installation Instructions Primary Use: Radar Detectors, GPS Units, Portable Music, Battery Charging Secondary Uses: Heated Vests, Bike-to-Bike Communicators, Cell phones Compatible With BMW, Triumph & Ducati Outlets & Accessories Quick to Install, 25 minutes, Once The Panels Are Off Easy To Access ATO Fuse, Located Next To The Battery Convenient To Use Mounting Location High Quality Connectors * Requires Drilling an 11/16" (18mm) Hole In Right Front Panel.
|
|
|
|
|
|
|
|
|
|
Leo Vince - CB 1000 R FAST SHIFT ROD FOR FAST SHIFT (OPTIONAL) 08-'10
|
List Price: $49.00
Our Price: $40.18
You save $8.82!
|
|
|
|
|
|
|
|
|
|
|
|
|
Powerlet - PKT-043 Type-2 Rearset Kit
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
Simple bolt on solution provides a Powerlet outlet for heated clothing, battery charging, powering Luggage Electrix, inflating tires, etc. The Type-2 bracket is designed to utilize existing rearset holes in the rear subframe. Clean installed appearance. Available in black only.
One Outlet Does It All
While these kits take only 20 minutes to install, they provide years of use for battery charging, heated clothing, cell phone charging and more.
|
|
|
|
|
|
|
|
|
|
Powerlet - PKT-069-B Type-3 Rearset Kit
|
List Price: $59.95
Our Price: $53.95
You save $6.00!
|
|
|
Simple bolt on solution provides a Powerlet outlet for heated clothing, battery charging, powering Luggage Electrix, inflating tires, etc. The bracket is designed to utilize existing rearset holes in the rear subframe. Clean installed appearance. Available in black only.
One Outlet Does It All
While these kits take only 20 minutes to install, they provide years of use for battery charging, heated clothing, cell phone charging and more.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Honda CBR600RR Fork Sliders
|
|
Our Price: $59.99
|
|
|
CBR600RR Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. The sliders install in less than one minute per side with only a 5mm key key once the front bolt has been drilled and tapped . They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0122 includes 2 fork sliders, stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
Note: This kit requires that the bolt securing the axle on the right side be drilled and tapped with an M6 hole. Predrilled OEM bolts are available for purchase elsewhere in this section.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Honda CBR1000RR '05 Fork Sliders
|
|
Our Price: $59.99
|
|
|
'05 1000RR Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from solid ABS rod for superior stregnth, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit requires that the axle retention bolt on the right side be removed and a nut (included in kit) be pressed into the bolt. Once this has been done, the sliders install in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0030 includes 1 fork sliders with locking taper, 1 slider with press-fit nut for bolt side of axle, stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Honda CBR1000RR '06-'07 Fork Sliders
|
|
Our Price: $59.99
|
|
|
'06-'07 1000RR Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from virgin plastic rod for superior stregnth, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit requires that the axle retention bolt on the right side be removed and a nut (included in kit) be pressed into the bolt. Once this has been done, the sliders install in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0026 fits 1000RR from '06 to '07 and includes 2 fork slider with locking taper, 1 slider with press-fit nut for bolt side of axle, stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
Techmount - Handlebar Mount (fits 7/8" thru 1 1/4" ) 3-30912
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
This is our 3rd generation mounting system. We were able to combine all of the current production handlebar sizes from 7/8” (22mm) up to 1 ¼” (32mm) into one mount system. This allows it to fit virtually every motorcycle with tubular handlebars. Requires only ¾” of handlebar space and can be mounted at any angle. Available in Chrome, Black or Silver. Having no need for a shaft, makes this mount system very strong and very compact. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate!
|
|
|
|
|
|
|
|
|
|
Techmount - Mirror Mount 10mm Threaded Mirror Base
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
Mirror Mounts are designed to thread into the un-used mirror mounting holes found on many metric motorcycles. Threads into any 10mm x 1.25 standard ( righthand ) or reverse (lefthand) pitch mirror hole. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate!
|
|
|
|
