|
|
|
|
|
|
Evotech - Ducati Monster 1100 Evo Rear Swingarm Slider
|
Our Price: $58.00
|
|
|
Evotech Performance spindle bobbins offer protection without spoiling your bike's good looks.
They are easy to fit and are retained by stainless steel spindles and stainless nyloc nuts, for added security.
The kit comprises two bobbins, spindle, nuts, washers and a hollow spindle nut when required, plus fitting instructions.
The bobbins are made from a high performance engineering polymer.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Ducati 1098/848 Fork Sliders
|
|
Our Price: $59.99
|
|
|
1098/848 Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from virgin engineering grade plastic rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0085 fits all Ducati 1098 and 848 models and includes 2 fork sliders with stainless steel fasteners, 2 RhinoMoto logo stickers and installation instructions.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Ducati Fork Sliders
|
|
Our Price: $59.99
|
|
|
Ducati Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from virgin engineering grade plastic rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0001 fits Monster except standard 620, 748/749, 998/999, Sport Classics, ST, Multistrada, 916 and some 900s. The kit includes 2 fork sliders with locking tapers and stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Ducati Hypermotard Fork Sliders
|
|
Our Price: $59.99
|
|
|
Ducati Hypermotard Fork Sliders
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from virgin engineering grade plastic rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0001 includes 2 fork sliders with locking tapers and stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Ducati Desmodici Fork Sliders
|
|
Our Price: $59.99
|
|
|
Desmosedici Fork Sliders New!
Your Price: $59.99
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from virgin engineering grade plastic rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0001-001 includes 2 fork sliders with locking tapers and stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Ducati 848/S2R/S4R Barends
|
|
|
848/S2R/S4R Barends
Your Price: $59.99
These barendsfeature steel bodies for vibration dampening weight, replaceable polymer buttons for the sliding surfaces. Adapters are included that fit bars with inner diameters ranging from .525" to .575" (13.5mm to 14.6mm). The bodies are available in stainless steel and black powder coated finishes. Kits are supplied with flat style buttons standard, but round buttons are available. Please specify barend finish and button style when ordering.
This kit fits Ducati 848, Monster S2R and Monster S4R models.
Kit 150-0065 includes 2 barends with choice of finish and button style, 2 bar adapters, stainless fasteners, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
Techmount - Handlebar Mount (fits 7/8" thru 1 1/4" ) 3-30912
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
This is our 3rd generation mounting system. We were able to combine all of the current production handlebar sizes from 7/8” (22mm) up to 1 ¼” (32mm) into one mount system. This allows it to fit virtually every motorcycle with tubular handlebars. Requires only ¾” of handlebar space and can be mounted at any angle. Available in Chrome, Black or Silver. Having no need for a shaft, makes this mount system very strong and very compact. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate!
|
|
|
|
|
|
|
|
|
|
Techmount - Mirror Mount 10mm Threaded Mirror Base
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
Mirror Mounts are designed to thread into the un-used mirror mounting holes found on many metric motorcycles. Threads into any 10mm x 1.25 standard ( righthand ) or reverse (lefthand) pitch mirror hole. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate!
|
|
|
|
|
|
|
|
|
|
Techmount - Handlebar Mount Chrome (fits 7/8" thru 1 1/4" ) 3-30912C
|
List Price: $99.95
Our Price: $89.95
You save $10.00!
|
|
|
This is our 3rd generation mounting system. We were able to combine all of the current production handlebar sizes from 7/8” (22mm) up to 1 ¼” (32mm) into one mount system. This allows it to fit virtually every motorcycle with tubular handlebars. Requires only ¾” of handlebar space and can be mounted at any angle. Available in Chrome, Black or Silver. Having no need for a shaft, makes this mount system very strong and very compact. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate!
|
|
|
|
|
|
|
|
|
|
Evotech - Ducati Monster 1100 Evo Exhaust Hanger
|
|
Our Price: $98.00
|
|
|
Ducati Monster 1100 EVO Exhaust Hanger Motorcycle Accessory
Enhance the sporting appearance of your Ducati by way of these race-bred brackets which are CNC machined from aircraft quality aluminium.
Evotechs exhaust hangers boast remarkable strength to weight ratio, typically weighing 130 - 200 grams for a single bracket.
Improve the lines of the Ducati by losing the pillion footrests and make your machine lighter in the process.
Evotech exhaust hanger are beautifully finished in a durable satin finish black powder coating.
The Ducati exhaust hanger accessory kit comes complete with a bracket and all necessary fixings.
|
|
|
|
