|
|
|
|
|
|
Powerlet - PKT-043 Type-2 Rearset Kit
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
Simple bolt on solution provides a Powerlet outlet for heated clothing, battery charging, powering Luggage Electrix, inflating tires, etc. The Type-2 bracket is designed to utilize existing rearset holes in the rear subframe. Clean installed appearance. Available in black only.
One Outlet Does It All
While these kits take only 20 minutes to install, they provide years of use for battery charging, heated clothing, cell phone charging and more.
|
|
|
|
|
|
|
|
|
|
Powerlet - PKT-069-B Type-3 Rearset Kit
|
List Price: $59.95
Our Price: $53.95
You save $6.00!
|
|
|
Simple bolt on solution provides a Powerlet outlet for heated clothing, battery charging, powering Luggage Electrix, inflating tires, etc. The bracket is designed to utilize existing rearset holes in the rear subframe. Clean installed appearance. Available in black only.
One Outlet Does It All
While these kits take only 20 minutes to install, they provide years of use for battery charging, heated clothing, cell phone charging and more.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Aprilia Fork Sliders
|
|
Our Price: $59.99
|
|
|
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from virgin engineering grade plastic rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0001fits all 1000cc Aprilia , Shiver 750 and RS250. It includes 2 fork sliders with locking tapers and stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Aprilia Swing Arm Sliders
|
|
Our Price: $68.99
|
|
|
Swingarm sliders protect the swingarm, rear axle, and axle nut in a crash and slide. The most common type of swingarm slider is a combination spool/slider, but these are prone to failure. Either the relatively small bolts holding the spools on shear off or the tabs themselves tear off the swingarm when the spools hit the ground. RhinoMoto swingarm sliders fit inside the axle and are supported by the axle when impacted from straight on or from the side. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the swingarm, avoiding that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
This kit fits all years RSV, RSVR, Tuono, Shiver, SXV and RXV.
Kit 150-0005 includes 2 sliders with locking tapers and stainless steel fasteners, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Aprilia '04+ Mille/'07+Tuono Rear Frame Sliders
|
|
Our Price: $99.99
|
|
|
'04+ Mille/'07+Tuono Rear Frame Sliders
List Price: $99.99
These sturdy frame slider kits are billet 6061 aluminum supports and buttons machined from solid polymer rod. All parts are CNC machined for a precision fit and the highest quality surface finish possible. The supports bolt through the frame and rear motor mounts with included hardened bolts. The buttons thread onto the supports and can be removed quickly without tools. Kit includes complete installation instructions and an 8mm hex key to reach recessed bolt heads for torquing. Available in both silver anodized and black powder coated finishes.
This kit fits '04+ RSVR/Factory and '07+ Tuono.
Kit 150-0034 includes 2 frame slider supports, 2 slider buttons, longer grade 12.9 bolts, a piece of hex stock to reach the recessed bolt heads, installation instructions and 2 RhinoMoto logo stickers
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Aprilia '98-'03 Mille Front Frame Sliders
|
|
Our Price: $99.99
|
|
|
'98-'03 Mille Front Frame Sliders
Your Price: $99.99
These sturdy frame slider kits are billet 6061 aluminum supports and buttons machined out of solid polymer rod. All parts are CNC machined for a precision fit and the highest quality surface finish possible. The supports bolt through the front motor mounts with included hardened bolts. The buttons thread onto the supports so that they can be removed quickly without tools. This allows a smaller hole to be cut in the radiator vents, since the wide button does not need to pass through them when the mid fairings are removed. Kit also includes complete installation instructions and an 8mm hex key to reach recessed bolt heads for torquing. Available in both silver anodized and black powder coated finishes.
This kit fits '98-'03 RSV and RSVR.
Kit 150-0007 includes 2 frame slider supports, 2 slider buttons, longer grade 12.9 bolts, a piece of hex stock to reach the recessed bolt heads, installation instructions and 2 RhinoMoto logo stickers.
This kit requires cutting of the fairing to clear the slider supports.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Aprilia '98-'03 Mille/'02-'05 Tuono Rear Frame Sliders
|
|
Our Price: $99.99
|
|
|
'98-'03 Mille/'02-'05 Tuono Rear Frame Sliders
Your Price: $99.99
These sturdy frame slider kits are billet 6061 aluminum supports and buttons machined from solid polymer rod. All parts are CNC machined for a precision fit and the highest quality surface finish possible. The supports bolt through the frame and rear motor mounts with included hardened bolts. The buttons thread onto the supports and can be removed quickly without tools. Kit also includes complete installation instructions and an 8mm hex key to reach recessed bolt heads for torquing. Available in both silver anodized and black powder coated finishes.
This kit fits '98-'03 RSV/RSVR and '02-'05 Tuono.
Kit 150-0008 includes 2 frame slider supports, 2 slider buttons, longer grade 12.9 bolts, a piece of hex stock to reach the recessed bolt heads, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
Woodcraft - Aprilia Tuono '07-'10 Frame Sliders
|
|
Our Price: $127.99
|
|
|
Durability - Woodcraft's patented 2-piece sliders are the most durable sliders on the market. Our perpendicular mounting bolt allows the slider to be solid rather than hollow (like other sliders) which provides nearly 50% more material on the road and much greater durability.
Hassle Free Replacement - Our 2-piece design with its perpendicular mounting bolt means that after a crash you won't be digging out a ground down bolt from the center of a destroyed hollow slider. Our sliders make puck replacement fast and easy thanks to our patented design
Race proven - Woodcraft's experienced racer R&D squad made it clear that sliders must stick out far enough to protect the bike but not so long they get ripped off as the bike slides down the road! The end result is all Woodcraft sliders are the ideal length giving you the protection without too much projection
Fairing Modification - Most models require modification to ensure optimal strength
|
|
|
|
|
|
|
|
|
|
Leo Vince - APRILIA RSV MILLE - R SBK OVAL EVOII ALUMINUM 98-'03
|
List Price: $349.00
Our Price: $286.18
You save $62.82!
|
|
|
Includes Optional Quiet Insert
|
|
|
|
|
|
|
|
|
|
Leo Vince - APRILIA RSV 1000 R SBK OVAL EVOII ALUMINUM 04-'08
|
List Price: $609.00
Our Price: $499.38
You save $109.62!
|
|
|
Dual Silencers. Includes Optional Quiet Insert
|
|
|
|
