|
|
|
|
|
|
Motion Pro - 08-0242 BIT, D-SHAPE F/USE WITH 08-0229
|
Our Price: $2.90
|
|
|
D-shaped bit, replacement
Durable nickel pewter finish
|
|
|
|
|
|
|
|
|
|
Motion Pro - 08-0002 REPLACEMENT PIN FOR 08-0001 CHAIN BREAKER
|
|
Our Price: $4.10
|
|
|
Heat treated for strength and wear resistance
|
|
|
|
|
|
|
|
|
|
Motion Pro - 08-0415 SyncPRO Carb Tuner Fluid Refill
|
|
Our Price: $5.50
|
|
|
Manometer fluid refill for 08-0411 SyncPRO Carb Tuner
Non-toxic
Mercury free
Motion Pro blue color
SyncPro Manometer Fluid Refill does NOT work with older Motion Pro mercury carburetor synchronizers
NOTE:
SyncPRO™ manometer fluid cannot replace mercury
and vice-versa
|
|
|
|
|
|
|
|
|
|
Motion Pro - 08-0218 VACUUM ADAPTER, BRASS W/CAP 5MM (EA)
|
|
Our Price: $7.10
|
|
|
Can be permanently installed on motorcycles that only have a plug in the vacuum port
Eliminates the need to install adapters before every carburetor synchronization
Rubber caps are included to seal vacuum
|
|
|
|
|
|
|
|
|
|
Motion Pro - 08-0182 CABLE LUBER
|
|
Our Price: $9.50
|
|
|
Used to inject lubricant into cable housing
Clamps over housing and wire allowing an aerosol can to be connected
Once lube runs out the far end, the cable is lubricated
Ideal for use with Motion Pro Cable Lube (Item 15-0002)
|
|
|
|
|
|
|
|
|
|
Motion Pro - 08-0385 Counter Balancer & Clutch Hub Spanner For Honda 20mm
|
|
Our Price: $9.50
|
|
|
Replaces 20 mm end of Honda OEM tool 07716-0020100
Used to remove Honda OEM nut 90231-KY4-900
4-Pin spanner made of heat-treated steel
Inside diameter is 20mm
Use with a 3/8 in. driver
Fits Counter Balancer Nut on: CRF450R 02-07, CRF450X 05-08 Fits Clutch Hub Nut on: PC50 69-70, Z50 68-99, S65 65-69 Fits Crank Shaft Nut on: CA100 (Trail 50) 61-62, CA102 62-69, CA105 (Trail 50) 63-65, CA110 62-69
|
|
|
|
|
|
|
|
|
|
Motion Pro - 01-0094 Throttle Sleeve KAW/SUZ/YAM
|
|
Our Price: $9.90
|
|
|
O.E.M. throttle sleeve replacement
Heavier duty and exceed the quality and durability of O.E.M. sleeves
WIll not scar bars like aluminum sleeves
Nylon fabric composite material
Pop-out end caps for use with bar-end-type hand gaurds
Molded ridges to help secure grips
One-piece tube and reel design
|
|
|
|
|
|
|
|
|
|
Motion Pro - 08-0357 Rim Protectors
|
|
Our Price: $9.99
|
|
|
Protects your wheel from scratches and dings caused by tire changing tools
Retrieval cords are included for easy
|
|
|
|
|
|
|
|
|
|
Motion Pro - 21-0016 Magnetic Finger Glove, each
|
|
Our Price: $10.90
|
|
|
Holds virtually any steel or iron fastener
Great for starting or removing fasteners in hard to reach places
2-way stretch spandex
Leatherette bottom and finger tip
Stretch finger panels
|
|
|
|
|
|
|
|
|
|
Motion Pro - 08-0388 T-6 Trail Bead Buddy
|
|
Our Price: $11.90
|
|
|
No more fighting to keep the bead down while installing or repairing your off-road tires
Holds the tire bead down in the drop center of the rim during tire changes
Machined from tough 6000 series aluminum
Light weight and compact enough for any tool pack
Delrin securing thumb screw keeps rims scar free
NOT recommended for users of Bib Mousse type off-road
|
|
|
|
