|
|
|
|
|
|
Powerlet - PKT-040 Sportbike Cigarette Socket Tail Kit
|
List Price: $27.95
Our Price: $25.15
You save $2.80!
|
|
|
When you need a low cost, quick installation of an automotive compatible 12V outlet, look no further. Some riders prefer the common cigarette type socket found in their automobile. We feel these cigarette socket kits are best installed inside of a compartment like a tail section, tankbag or other luggage. Powerlet has designed these kits using the tightest fitting cigarette sockets available. A tight fitting cigarette socket can see reduced vibration inside of a tankbag or other luggage.
|
|
|
|
|
|
|
|
|
|
Powerlet - PKT-043 Type-2 Rearset Kit
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
Simple bolt on solution provides a Powerlet outlet for heated clothing, battery charging, powering Luggage Electrix, inflating tires, etc. The Type-2 bracket is designed to utilize existing rearset holes in the rear subframe. Clean installed appearance. Available in black only.
One Outlet Does It All
While these kits take only 20 minutes to install, they provide years of use for battery charging, heated clothing, cell phone charging and more.
|
|
|
|
|
|
|
|
|
|
Powerlet - PKT-069-B Type-3 Rearset Kit
|
List Price: $59.95
Our Price: $53.95
You save $6.00!
|
|
|
Simple bolt on solution provides a Powerlet outlet for heated clothing, battery charging, powering Luggage Electrix, inflating tires, etc. The bracket is designed to utilize existing rearset holes in the rear subframe. Clean installed appearance. Available in black only.
One Outlet Does It All
While these kits take only 20 minutes to install, they provide years of use for battery charging, heated clothing, cell phone charging and more.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Aprilia Fork Sliders
|
|
Our Price: $59.99
|
|
|
Fork sliders help protect the front axle, axle nut, fork bottoms, brake calipers and rim during a crash and slide. The parts are CNC machined from virgin engineering grade plastic rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the fork bottoms. This protects the axle and nut from even side impacts and avoids that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
Kit 150-0001fits all 1000cc Aprilia , Shiver 750 and RS250. It includes 2 fork sliders with locking tapers and stainless steel bolts, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Aprilia Swing Arm Sliders
|
|
Our Price: $68.99
|
|
|
Swingarm sliders protect the swingarm, rear axle, and axle nut in a crash and slide. The most common type of swingarm slider is a combination spool/slider, but these are prone to failure. Either the relatively small bolts holding the spools on shear off or the tabs themselves tear off the swingarm when the spools hit the ground. RhinoMoto swingarm sliders fit inside the axle and are supported by the axle when impacted from straight on or from the side. The parts are CNC machined from solid polymer rod for superior strength, fit and finish. Features are machined into each part to allow them to fit over the axle and flush against the swingarm, avoiding that "skateboard wheel stuck on the end of the axle" look. This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.
This kit fits all years RSV, RSVR, Tuono, Shiver, SXV and RXV.
Kit 150-0005 includes 2 sliders with locking tapers and stainless steel fasteners, installation instructions and 2 RhinoMoto logo stickers.
|
|
|
|
|
|
|
|
|
|
Techmount - Handlebar Mount (fits 7/8" thru 1 1/4" ) 3-30912
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
This is our 3rd generation mounting system. We were able to combine all of the current production handlebar sizes from 7/8” (22mm) up to 1 ¼” (32mm) into one mount system. This allows it to fit virtually every motorcycle with tubular handlebars. Requires only ¾” of handlebar space and can be mounted at any angle. Available in Chrome, Black or Silver. Having no need for a shaft, makes this mount system very strong and very compact. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate!
|
|
|
|
|
|
|
|
|
|
Techmount - Mirror Mount 10mm Threaded Mirror Base
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
Mirror Mounts are designed to thread into the un-used mirror mounting holes found on many metric motorcycles. Threads into any 10mm x 1.25 standard ( righthand ) or reverse (lefthand) pitch mirror hole. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate!
|
|
|
|
|
|
|
|
|
|
Techmount - Handlebar Mount Chrome (fits 7/8" thru 1 1/4" ) 3-30912C
|
List Price: $99.95
Our Price: $89.95
You save $10.00!
|
|
|
This is our 3rd generation mounting system. We were able to combine all of the current production handlebar sizes from 7/8” (22mm) up to 1 ¼” (32mm) into one mount system. This allows it to fit virtually every motorcycle with tubular handlebars. Requires only ¾” of handlebar space and can be mounted at any angle. Available in Chrome, Black or Silver. Having no need for a shaft, makes this mount system very strong and very compact. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate!
|
|
|
|
|
|
|
|
|
|
Givi - Givi T770 Aprilia Shiver, all years Tubular Side Holder for Soft Luggage
|
List Price: $100.00
Our Price: $90.00
You save $10.00!
|
|
|
Tubular side holder for soft luggage
|
|
|
|
|
|
|
|
|
|
RhinoMoto - Aprilia '04+ Mille/'07+Tuono Rear Frame Sliders
|
|
Our Price: $99.99
|
|
|
'04+ Mille/'07+Tuono Rear Frame Sliders
List Price: $99.99
These sturdy frame slider kits are billet 6061 aluminum supports and buttons machined from solid polymer rod. All parts are CNC machined for a precision fit and the highest quality surface finish possible. The supports bolt through the frame and rear motor mounts with included hardened bolts. The buttons thread onto the supports and can be removed quickly without tools. Kit includes complete installation instructions and an 8mm hex key to reach recessed bolt heads for torquing. Available in both silver anodized and black powder coated finishes.
This kit fits '04+ RSVR/Factory and '07+ Tuono.
Kit 150-0034 includes 2 frame slider supports, 2 slider buttons, longer grade 12.9 bolts, a piece of hex stock to reach the recessed bolt heads, installation instructions and 2 RhinoMoto logo stickers
|
|
|
|
